Nola Viper Reference
The Viper series embodies Nola's generation III open baffle technology. In borrowing many of the concepts from the Grand Reference System, Nola developed a new configuration with superior performance, along with a completely new cosmetic design.

Viper II, Viper II Plus, and Viper Reference use twin 8-inch low frequency transducers, each in a separate sealed chamber. The chambers are not only separate but of different sizes to provide an improved speed-bandwidth product and a smoother room LF response. The dual woofers provide improved room loading in the lower mid range and mid bass with increased power handling, while maintaining the transparency and transient response of our single woofer systems. A new woofer suspension has been developed for maximum linearity. Both woofers are run in parallel for maximum amplifier control.


Read the Home Theater review of the ultimate home theater, featuring Nola's Viper, LCR Reference and T Bolt II loudspeakers.
All of the loudspeakers in the Viper Series feature midrange and high frequency transducers that are deployed in a 45 degree mirror imaged array on an open baffle (the same as the Grand Reference) to provide more realistic image sizes while retaining excellent image focus. A cast frame, tri-laminate 5¼-inch cone midrange is driven by a premium Alnico magnet system, reproducing the midrange without coloration. A 1-inch aluminum dipole dome tweeter reproduces the high frequencies.

The Viper II Plus upgrades the tweeter with a premium dual-ring Alnico magnet system.

The Viper Reference utilizes Alnico magnet systems for the midrange and high frequency drivers for superior sound reproduction. It also features an external crossover to eliminate coloration due to the electric, magnetic and vibrational interactions which occur when mounting a crossover inside the speaker enclosure.

All Viper models feature removable front and rear grilles that allow the Viper the most open sound yet - completely free of obstructions for the midrange and tweeter.

Click here for connection and setup instructions.


Specifications
Viper Reference

Response: 25 Hz to 25000 Hz
Low Frequency: Twin cast magnesium 220mm bass drivers, sealed system
Mid Frequency: 110mm tri-laminate cone with Alnico magnet
High Frequency: 25mm dipole dome with twin Alnico magnets
Impedance: 8 ohm nominal / 4 ohm minimum
Power: 10 watts or more
Crossover: External bi-wire
Finish: Light Cherry Wood with black cloth
Dimensions: 46"H x 10"W x 15"D, 80 lbs.
MSRP: $12,000

Viper II Plus

Response: 28 Hz to 25000 Hz
Low Frequency: Twin 8" sealed/stagger tuned
Mid Frequency: 5 1/4" tri-laminate cone / open baffle Alnico
High Frequency: 1" alum. dipole dome, open baffle, with Alnico magnet
Impedance: 8 ohm nominal / 4 ohm minimum
Power: 10 watts or more
Crossover: Two board bi-wire, internal
Finish: Cherry Wood with black cloth or Light Ash Wood with black cloth
Dimensions: 40"H x 10"W x 15"D, 75 lbs.
MSRP: $6000

Viper II

Response: 35 Hz to 25000 Hz
Low Frequency: Twin 8" sealed/stagger tuned
Mid Frequency: 5 1/4" tri-laminate cone / open baffle Alnico
High Frequency: 1" alum. dipole dome, open baffle
Impedance: 8 ohm nominal / 4 ohm minimum
Power: 10 watts or more
Crossover: Two board bi-wire, internal
Finish: Cherry Wood with black cloth or Light Ash Wood with black cloth
Dimensions: 40"H x 10"W x 15"D, 75 lbs.
MSRP: $4500

Specifications subject to change without notice.

 

Link to this page